- Tier II Cummins QSB5.9 electronic, turbocharged diesel engine
- Three speed fully reversing, modulated, powershift transmission with inching and electric shift control
- Rugged high-strength, all welded chassis and frames
- Ergonomically designed shock-mounted operator stations
- Fingertip full hydrostatic steering
- Lower fan speed and engine speed for less noise
- Cooling system with wide fin spacing to reduce dirt build-up and provide optimum engine cooling
- Meets new proposed ANSI B56.1 standard
- All daily checks can be made from running board
Taylor Machine Works has designed, built, and marketed empty-container handlers since 1976. "Big Red" empty handlers reflect the experience and knowledge gained during those years. Taylor empty handlers are "All American," designed and built in the USA. Taylor is always on the cutting edge of industrial technology, always committed to designing and building the best, most productive, most dependable container handling equipment in the world.
The TEC and TECSP Series are equiped with a wide assortment of masts and attachments to better meet your particular need. The following lists the standard mast and attachment by model.
- TEC-150H
- 30-ft ULTRA-VU Mast
- Empty Container Attachment with Two ISO Rear Twistlocks
- ± 24-inch Side Shift
- TEC-155H
- 40-ft ULTRA-VU Mast
- Empty Container Attachment with Two ISO Rear Twistlocks
- ± 24-inch Side Shift
- TECSP-155H
- 42-ft ULTRA-VU Mast
- Empty Side Post Container Attachment with Two ISO Rear Twistlocks
- ± 20-inch Side Shift
- TECSP-155HD
- 45-ft ULTRA-VU Mast
- Empty Side Post Container Attachment with Two ISO Rear Twistlocks
- ± 20-inch Side Shift
- TECSP-156H
- 45-ft ULTRA-VU Mast
- Empty Side Post Container Attachment with Two ISO Rear Twistlocks
- ± 20-inch Side Shift
- TECSP-157/8
- 63-ft ULTRA-VU Mast
- Empty Side Post Container Attachment with Two ISO Rear Twistlocks
- ± 20-inch Side Shift
|
Click Image to Enlarge
|
Taylor TEC/TECSP Product Line
- TEC-150H (15,000-lb. Cap./4-High Stacking at 94" Center of Load, 144" Wheelbase)
- TEC-155H (15,000-lb. Cap./5-High Stacking at 96" Center of Load, 144" Wheelbase)
- TECSP-155H (15,000-lb. Cap./5-High Stacking at 94.5" Center of Load, 144" Wheelbase)
- TECSP-155HD (97.75" Center of Load, 180" Wheelbase)
- Rated Capacity for 9.5-ft High Containers:
15,000-lbs/5-high stacking
- Rated Capacity for 8.5-ft High Containers:
15,000-lbs/6-high stacking
- TECSP-156H (95.75" Center of Load, 144" Wheelbase)
- Rated Capacity for 9.5-ft High Containers:
16,600-lbs/5-high stacking
- Rated Capacity for 8.5-ft High Containers:
16,600-lbs/6-high stacking
- TECSP-157/8 (102.75" Center of Load, 180" Wheelbase)
- Rated Capacity for 9.5-ft High Containers:
15,000-lbs/7-high stacking
- Rated Capacity for 8.5-ft High Containers:
15,000-lbs/8-high stacking
All Taylor products are supported by Taylor's legendary after market customer support,
to learn more, Please visit Sudden Service, Inc.
|
Standard Equipment List
Tier II Cummins QSB5.9 Electronic Turbocharged Diesel Engine •
Lockable Fuel Cap w/Strainer •
Dry-type Air Cleaner w/Safety Element & Restriction Indicator •
12-Volt Electrical System w/100 Amp Alternator & Reset Circuit Breakers •
Key-type Anti-restart Ignition System •
Tilt Steering •
175 Amp-Hour Battery •
Electric Horn •
Keyswitch-actuated Amber Strobe Light •
Reverse-actuated Backup Alarm •
Forward Alarm •
Rear View Mirrors •
Powershift Transmission - 3 speed w/Inching, Modulated, w/Electric Shift Control •
Single Hydraulic Cylinder Designed Steer Axle •
Wide Stance Outboard Planetary Drive Axle with Hypoid Ring Gear and Pinion •
Transmission Mounted, Spring On, Air Off Parking Brake w/Brake Saver System •
Fingertip Full Hydrostatic Steer-On-Demand Steering System •
Rear Center Mount, Elevated Operator Station Shock Mounted w/Skyview Window •
Vinyl Covered Mechanical Suspension Seat w/Arm Rest and Anti-cinch Operator Restraint •
Spin-on Tank Breather with Dual Wire Mesh Strainers and Full Flow 10-Micron Return Filter in Tank •
Mast and Carriage Main Rollers w/Shielded, Tapered Roller Bearings and Chain Rollers w/Shielded Ball Bearings •
|
|
