TX Series Industrial Forklifts
"Excellence Backed By Experience"

Click Thumbs for Image Information

The TX Series 24-in. L.C. Series of Industrial Pneumatic Forklifts were designed and engineered with the operator and service personnel in mind. The TX Series offers standard features including increased leg and head room, tilt steering wheel, shock mounted center mounted operator station, fingertip electric joystick controls, and CANbus technology for operator comfort and convenience. Available in five different wheelbases, the TX Series has the right truck for your application.

TX Series Wheelbase and Capacity TX-160 (16,000-lb. Cap. at 24" L.C., 97" Wheelbase) TX-175 (17,500-lb. Cap. at 24" L.C., 97" Wheelbase) TX-180S (18,000-lb. Cap. at 24" L.C., 101" Wheelbase) TX-200S (20,000-lb. Cap. at 24" L.C., 101" Wheelbase) TX-220S (22,000-lb. Cap. at 24" L.C., 101" Wheelbase) TX-250S (25,000-lb. Cap. at 24" L.C., 110" Wheelbase) TX-250M (25,000-lb. Cap. at 24" L.C., 121" Wheelbase) TX-280S (28,000-lb. Cap. at 24" L.C., 110" Wheelbase) TX-280M (28,000-lb. Cap. at 24" L.C., 121" Wheelbase) TX-300S (30,000-lb. Cap. at 24" L.C., 110" Wheelbase) TX-300M (30,000-lb. Cap. at 24" L.C., 121" Wheelbase) TX-330S (33,000-lb. Cap. at 24" L.C., 110" Wheelbase) TX-330SL (Lower Profile) (33,000-lb. Cap. at 24" L.C., 110" Wheelbase) TX-330M (33,000-lb. Cap. at 24" L.C., 121" Wheelbase) TX-360M (36,000-lb. Cap. at 24" L.C., 121" Wheelbase) TX-360L (36,000-lb. Cap. at 24" L.C., 138" Wheelbase)

Want to learn more?

Taylor Machine Works has a comprehensive 12 page brochure pointing out many of the major component, features, and specifications of the TX Series and a promotional flyer which describes the basic components of the TX-160 and TX-175 lift trucks.
Note: Brochure(s) will open in a new window

CANbus Technology

All machine controls are integrated using solid state controllers and J1939 CANbus technology. This allows controllers and sensors to communicate with minimal wiring between the components. I/O modules are used to eliminate electromechanical relay devices and add reliability to the machine control system. J1939 CANbus technology allows all machine data to be accessed through the main color display located in the cab. This display shows engine data along with warnings, spreader status lights, and man/ machine interface data. The display allows service personnel to access data needed during troubleshooting (such as sensor status and controller outputs). Machine functions can be tuned through the main display in the cab. Tuning functions are password protected to prevent operator access.

Drive Train

Each model in the TX Series line of lift trucks uses a Tier Certified Cummins® electronic turbocharged, charge air aftercooled (air to air) diesel engine. Standard engine features include electronic diagnostic and maintenance monitor, fuel/water separator and engine/transmission protection systems, improved fuel economy, and reduced emissions.

The transmission for the TX Series is a three-speed, fully reversing, modulated powershift transmission with inching, electric roll shift control, and a separate air-to-oil cooler.
Plese contact your local dealer for additional information

Parts & Service

All Taylor products are supported by Sudden Service, Inc.'s legendary after market customer support. To learn more, please visit Sudden Service, Inc.

| Site Map | Terms of Use | Image Gallery | Contact Us |
Copyright © 2009 Taylor Machine Works, Inc.
Taylor Machine Works, Inc. is a proud member of ^" The Taylor Group of Companies^"
All trademarks and registered trademarks are the property of their respective owners.