|
Taylor Machine Works, Inc. is proud to introduce the new TX 24-in.L.C. Series of Industrial Pneumatic Forklifts. This series was designed and engineered with the operator and service personnel in mind. The TX Series offers standard features including increased leg and head room, tilt steering wheel, shock mounted center mounted operator station, fingertip electric joystick controls, and CANbus technology for operator comfort and convenience. More than 80 years of experience in engineering, manufacturing, and customer support gives these trucks the dependability you demand. You Can Depend on the Big Red team and the TX Series Forklifts to get the job done.
CANbus Technology
All machine controls are integrated using solid state controllers and J1939 CANbus technology. This allows controllers and sensors to communicate with minimal wiring between the components. I/O modules are used to eliminate electromechanical relay devices and add reliability to the machine control system. J1939 CANbus technology allows all machine data to be accessed through the main color display located in the cab. This display shows engine data along with warnings, spreader status lights, and man/ machine interface data. The display allows service personnel to access data needed during troubleshooting (such as sensor status and controller outputs). Machine functions can be tuned through the main display in the cab. Tuning functions are password protected to prevent operator access.
Drive Train
The engine for the TX Series is a Tier Certified Cummins QSB6.7--C160 electronic turbocharged, charge air aftercooled (air to air) 6-cylinder diesel.
Standard features are electronic diagnostic and maintenance monitor, fuel/water separator and engine/transmission protection systems, improved fuel economy, and
reduced emissions.
The transmission for the TX Series is a three-speed, fully reversing, modulated powershift
transmission with inching, electric roll shift control, and a separate air-to-oil cooler.
Wheelbase and Capacity
Three of the TX Series models, built on the newly designed 101-in. wheelbase, allow easy operation in narrow aisle applications. These shorter wheelbases are available in capacities of 18,000-lbs., 20,000-lbs., and 22,000-lbs. Four models are built on a 110-in. wheelbase, the capacities for these models are 25,000-lbs, 28,000-lbs., 30,000-lbs., and 33,000-lbs. On the 121-in. wheelbase, five models are available with capacities of 25,000-lbs., 28,000-lbs., 30,000-lbs., 33,000-lbs., and 36,000-lbs. One model is currently available on the new 138-in. wheelbase, rated at the 24-in. load center with a capacity of 36,000 lbs.
| Taylor TX Product Line |
- TX-180S (18,000-lb. Cap. at 24" L.C., 101" Wheelbase)
- TX-200S (20,000-lb. Cap. at 24" L.C., 101" Wheelbase)
- TX-220S (22,000-lb. Cap. at 24" L.C., 101" Wheelbase)
- TX-250S (25,000-lb. Cap. at 24" L.C., 110" Wheelbase)
- TX-250M (25,000-lb. Cap. at 24" L.C., 121" Wheelbase)
- TX-280S (28,000-lb. Cap. at 24" L.C., 110" Wheelbase)
- TX-280M (28,000-lb. Cap. at 24" L.C., 121" Wheelbase)
- TX-300S (30,000-lb. Cap. at 24" L.C., 110" Wheelbase)
- TX-300M (30,000-lb. Cap. at 24" L.C., 121" Wheelbase)
- TX-330S (33,000-lb. Cap. at 24" L.C., 110" Wheelbase)
- TX-330M (33,000-lb. Cap. at 24" L.C., 121" Wheelbase)
- TX-360M (36,000-lb. Cap. at 24" L.C., 121" Wheelbase)
- TX-360L (36,000-lb. Cap. at 24" L.C., 138" Wheelbase)
|
All Taylor products are supported by Taylor's legendary after market customer support. To learn more, please visit Sudden Service, Inc.
|
 Preliminary 3D Isometric View
 Preliminary Front View
 Preliminary Left Hand View
 Preliminary Rear View
|
.jpg)
