Taylor "Big Red" THDC / TETCP Series Loaded Container Handlers with the lowest total operating cost in the industry.
Smooth and rapid duty cycles
Heavy load handling capabilities
Turbocharged diesel engine
Three-speed modulated powershift transmission
Rugged high-strength all welded chassis and frame
Erogonomically designed operator module
Minimum effort pilot controls and minimum noise level
State-of-the-art THDC Series loaded container handlers are dependable,
highly productive, and cost effective.
The THDC-974 and THDCP-974 models are capable of stacking ISO and WTP loaded containers four-high; THDC-975 and THDCP-975 models stack five-high.
The THDC-974 has a rated capacity of 90,000-lbs. in the first and second tiers and 85,000-lbs. in the third and fourth tiers at 97-inch center of load. At 106-inch center of load, the capacity for the THDC-974 is 82,000-lbs. in the first and second tiers and 80,000-lbs. in the third and fourth tiers.
The THDC-975 has a rated capacity of 90,000-lbs. in the first and second tiers and 80,000-lbs. in the third, fourth, and fifth tiers at 97-inch center of load. At 106-inch center
of load, the capacity for the THDC-975 is 82,000-lbs. in the first and second tiers and 75,000-lbs. in the third, fourth, and fifth tiers. View the THDC Series Facts and Features Page
The THDCP models comes equiped with an attachment capable of handling ISO, WTP, and Pin containers. The THDCP-974 has a ISO and WTP container rated capacity of 86,000-lbs. / 2-high and 81,000-lbs. / 4-high , at 97-in. center of load. At 106-in. center of load, the capacities are 78,000-lbs. / 2-high and 76,000-lbs. / 4-high. The pin container rated capacity for the THDCP-974 is 67,200-lbs. / 2-high, both at 96-in. and 106-in. center of load.
The THDCP-975 has a ISO and WTP container rated capacity of 86,000-lbs. / 2-high and 76,000-lbs. / 5-high , at 97-in. center of load. At 106-in. center of load, the capacities are 78,000-lbs. / 2-high and 71,000-lbs. / 5-high. The pin container rated capacity for the THDCP-975 is 67,200-lbs. / 2-high, both at 96-in. and 106-in. center of load.
The TETCP-1100I Trailer/Container Handler is specifically designed to handle loaded trailers and containers from flat cars and all types of double stack rail cars. Built on a 288-in. wheelbase with a 127-inch center of load, the
TETCP-1100I capacities are:
ISO Container - 80,000 lbs./three high stacking
Pin Container - 67,200 lbs./two high stacking
Trailer - 90,000 lbs.
All models meet 2005 EPA Tier III emissions regulations.
Standard features are electronic diagnostic and maintenance
monitor, fuel filter/water separator, and engine/transmission
protection systems. The three-speed, fully reversing, modulated,
powershift transmission has declutch and electric shift.
All Taylor products are supported by Taylor's legendary after market customer support,
to learn more, Please visit Sudden Service, Inc.
Taylor THDC / TETCP Product Line
THDC-974 Rated Capacity At 97-in. (2,464 mm) Center of Load
90,000-lbs. (40,824 kg) / 2-high Stacking
85,000-lbs. (38,556 kg) / 3 and 4-high Stacking
Rated Capacity At 106-in. (2,692 mm) Center of Load
82,000-lbs. (37,195 kg) / 2-high Stacking
80,000-lbs. (36,288 kg) / 3 and 4-high Stacking
236-in. (5,994 mm) Wheelbase
THDC-975 Rated Capacity At 97-in. (2,464 mm) Center of Load
90,000-lbs. (40,824 kg) / 2-high Stacking
80,000-lbs. (36,288 kg) / 5-high Stacking
Rated Capacity At 106-in. (2,692 mm) Center of Load
82,000-lbs. (37,195 kg) / 2-high Stacking
75,000-lbs. (34,020 kg) / 5-high Stacking
236-in. (5,994 mm) Wheelbase
THDCP-974 ISO and WTP Container Rated Capacity at 97-in. (2,464 mm) Center of Load
86,000-lbs. (39,010 kg) / 2-high Stacking
81,000-lbs. (36,742 kg) / 4-high Stacking
ISO and WTP Container Rated Capacity at 106-in. (2,692 mm) Center of Load
78,000-lbs. (35,381 kg) / 2-high Stacking
76,000-lbs. (34,483 kg) / 4-high Stacking
Pin Container Rated Capacity at 97-in. and 106-in. Center of Load
67,200-lbs (30,490 kg) / 2-high Stacking
236-in. (5,994 mm) Wheelbase
THDCP-975 ISO and WTP Container Rated Capacity at 97-in. (2,464 mm) Center of Load
86,000-lbs. (39,010 kg) / 2-high Stacking
76,000-lbs. (34,483 kg) / 5-high Stacking
ISO and WTP Container Rated Capacity at 106-in. (2,692 mm) Center of Load
78,000-lbs. (35,381 kg) / 2-high Stacking
71,000-lbs. (32,214 kg) / 5-high Stacking
Pin Container Rated Capacity at 97-in. and 106-in. Center of Load
67,200-lbs (30,490 kg) / 2-high Stacking
236-in. (5,994 mm) Wheelbase
TETCP-1100I Rated Capacities
ISO Container 80,000-lbs. (36,288 kg)/3-high Stacking
Pin Container 67,200-lbs. (30,482 kg)/2-high Stacking
Trailer 90,000-lbs. (40,824 kg)
127-in. (3,226 mm) Center of Load
288-in. (7,315 mm) Wheelbase
For more
information on the products shown below or any products The Taylor Group has
to offer, contact us.
